- The Complete Research Material is averagely 38 pages long and it is in Ms Word Format, it has 1-5 Chapters.
- Major Attributes are Abstract, All Chapters, Figures, Appendix, References.
- Study Level: BTech, BSc, BEng, BA, HND, ND or NCE.
- Full Access Fee: ₦6,000
Get the complete project »
ABSTRACT
This project is based on the possible exploration of computer Technology in Today society in market surveying in the daily discharge of duties.
This project involves the design and development of computerized market survey report analysist.
The design will enable the user to achieve a desirable report at an increased efficiency, accuracy and speed of doing work and at the same time reduce man – hour repured for piece of work.
This calls for an alternative method which ie accurate, quick and inexpensive. This project achieved merit by eliminating all these flows that result from manual operation and present a very accurate, decisive and systematic measure of survey report.
TABLE OF CONTENT
CHAPTER ONE
1.0 Introduction
1.1 Background
1.2 Aim or objective of the study
1.3 Statement of the problem or purpose
1.4 Justification of the purpose topic
1.5 Scope of the project
Methodology
Block diagram
Thesis Organization
CHAPTER TWO
LITERATURE REVIEW
CHAPTER FIVE
3.0 overview of the existing system
3.1 Description and analysis of the existing system
3.2 Method of data collection
3.2.1 Interview method
3.2.2 Reference to written text
3.3 Input analysis
3.4 Process analysis
3.5 Output analysis
3.6 Input analysis
3.7 Problem of the existing system
3.8 Justification for the new system
CHAPTER FOUR
4.0 Design for the new system
4.1 Output specification and design
4.2 Input specification and design
4.3 File design
4.4 Procedure chart
4.5 System flowchart
4.6 System requirement
CHAPTER FIVE
Implementation
Program design
Program flowchart
Pseudo code
Source listing
Test-run
CHAPTER SIX
DOCUMENTATION
CHAPTER SEVEN
Recommendation & conclusion
Reference
Appendix (if any)
CHAPTER ONE
1.0 INTRODUCTION
In order not to embrace hitch in the carrying out of any project, it is necessary to define the objective of the project. The process surveying enable us to map out the limitation and the delimitation of the project.
In surveying, we set out the necessary steps and areas that considered to be useful and necessary to implement the objective.
In this case, we identify the problem, it’s sources, causes and to identify solutions to the problem.
In the case study of doing these, the objective must be certain.
1.1 BACKGROUND OF THE STUDY
The Background of this study involves indent study of the system report being designed to determine the input data to the report system and how system report objective can be realized.
Data collected or survey made determined the system output and input and grouped into various files (1) Equipment requirement.
EQUIPMENT REQUIREMENT: To use this report system in survey the following equipment may be needed.
i) An IBM or its compatible
ii) Magnetic Diskette (3.25 x 5.25 or 35 x 3.5 inches)
iii) An IBM line printer or its compatible
iv) A printer interface cable.
Optional equipment: Hard Disk Properly Installed.
MEMORY REQUIREMENT: The design of this system was highly structured by breaking the program in module using Top-Down design technique and loding the program in GW BASIC. Each program after use call another program from the diskette and pass over the content of relevant variable over to the incoming program by using “COMMON” statement it minimizes effectively the size of primary memory required by the system.
TEST DATA
The whole system was tested by obtaining survey analysis of previous building project. Fed the cost of sub-element into the system and compare the output.
DOCUMENTATION
This system is documented in a way that any one who is not a computer scientist or market surveyor can use it effectively. The following types of a documentation are implemented.
i) Design documentation
ii) Operational documentation
iii) Test documentation
1.4 OBJECTIVE OF THE PROJECT AIM
Market survey report system has the following objectives
(i) To give client good value for money
(ii) To achieve the required balance of expenditure between the various parts of the building
(ii) To keep expenditure within the amount allowed by the client.
1.5 STATEMENT OF THE PROBLEM OR PURPOSE
Recent Researchers to a great extent have been directed towards finding means of efficience, accuracy and speed of doing work and at the same time reducing man-hou. Required for each piece of work. The success of these Researchers have been attributed to the invention of modern computers.
But all these recent invention and discoveries not withstanding, the work of the market surveyor has largely remained a manual work. Hence the research problem is to explore the possibility of the market surveyor in Nigeria employing the technology of our days (computer) in the daily discharge of his duties. The use of computer in cost planning has the following advantages over the manual process.
SPEED - Computer are very fast in carrying out operations as compared to humans. E.g the production of survey plan may take five to 10 man – days. But with computers, it is a matter of seconds. This reduces the time of the market surveyor will spend on each job.
ACCURACY: Once the data have been entered correctly into the computer the need for further manipulation by means of humans is eliminated and possible errors reduced. Also when properly programmed, computers are unlikely to make computational errors.
1.4 JUSTIFICATION OF THE PROJECT TOPIC
It is justified that ever before the introduction of computers in survey system report process, there was no accurate and complete similar work related to such. Therefore, we advice that in the course of this research work if necessary any suggestions would be welcome.
1.5 SCOPE OF THE PROJECT
METHODOLOGY
For a perfect and accurate result a any system, it all depend on the data collected. In any Research of this nature, it sis proper to ambark on secondary method of data collect in other to, achiee a decisive result.
SOURCE OF DATA
The source of data for this project work include text book, journals, market surveying firms and computer centers.
METHOD OF DATA COLLECTION
The data collection method used in this work are personal interview and distribution of questionnaires to market surveying firm, and use of website (internet)
REASONS FOR DATA COLLECTION METHOD
Because of the nature of the project work which does not call for the sampling of people’s opinion, But ascertaining what is obtainable in the field, and interviewing of market surveyors was adopted.
On the other hand, visiting of NET and professional journals like I said earlier was consulted to facilitate balancing between the idea and the actual practice.
THESIS ORGANIZATION
This research work is based on two angles. First, it is viewed that, the survey report system needs enhancement format to facilitate the process. Tow, the market surveyor needs to be equipped with items needed to enhance his efforts.
Therefore, the use of computer is considered necessaries market surveying system processing.
In this research work, the use of computers, its importance, and its application in market surveying has been stated and specified int his project work. What the surveyor need to do, how he can do it, and how he can use it are all stated and specified here.
You either get what you want or your money back. T&C Apply
You can find more project topics easily, just search
-
SIMILAR COMPUTER SCIENCE FINAL YEAR PROJECT RESEARCH TOPICS
-
1. DESIGN AND IMPLEMENTATION OF STUDENT EVALUATION PROGRAM (A CASE STUDY OF DAUGHTERS OF DIVINE LOVE JUNIORATE)
» ABSTRACT Student achievement is profoundly influenced by the evaluation practice used by teachers in the classroom. Research in education has consiste...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | COMPUTER SCIENCE DEPARTMENT
-
2. DESIGN AND IMPLEMENTATION OF A SOCIAL MEDIA BASED WEB APPLICATION FOR PROSPECTIVE UNIVERSITY STUDENTS
» ABSTRACT The internet has been a platform for individuals, groups of people and companies to interact with one another through the social media. The s...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | COMPUTER SCIENCE DEPARTMENT
-
3. DESIGN AND IMPLEMENTATION OF PATIENT MANAGEMENT SYSTEM
» CHAPTER ONE 1.0 INTRODUCTION Generally, computer has played an important role in global economy in various ways. The Computer is used in many differen...Continue Reading »Item Type & Format: Project Material - Ms Word | 55 pages | Instant Download | Chapter 1-5 | COMPUTER SCIENCE DEPARTMENT
-
4. COMPUTERIZED RENTAL SERVICES MANAGEMENT INFORMATION SYSTEM
» CHAPTER ONE INTRODUCTION Most rental service firms today still use manual information system because their information needs are of moderate size and ...Continue Reading »Item Type & Format: Project Material - Ms Word | 70 pages | Instant Download | Chapter 1-5 | COMPUTER SCIENCE DEPARTMENT
-
5. DESIGN AND IMPLEMENTATION OF NYSC POSTING SYSTEM (A CASE STUDY OF NYSC HEADQUATER ABUJA)
» CHAPTER ONE INTRODUCTION INTRODUCTION The National Youth Service Corps (NYSC) is a scheme organized to have fresh Nigeria graduates passed through a o...Continue Reading »Item Type & Format: Project Material - Ms Word | 53 pages | Instant Download | Chapter 1-5 | COMPUTER SCIENCE DEPARTMENT
-
6. ELECTRONIC LOGBOOK FOR STUDENTS INDUSTRIAL WORK EXPERIENCE SCHEME (S.I.W.E.S)
» CHAPTER ONE INTRODUCTION Scientists and engineers traditionally kept paper logbooks of their experiments and inventions. The need for the logbook is c...Continue Reading »Item Type & Format: Project Material - Ms Word | 63 pages | Instant Download | Chapter 1-5 | COMPUTER SCIENCE DEPARTMENT
-
7. DESIGN AND IMPLEMENTATION OF ONLINE CAMPUS VOTING SYSTEM (A CASE STUDY OF STUDENT UNION GOVERNMENT (SUG)UNIVERSITY OF IBADAN)
» CHAPTER ONE INTRODUCTION 1.1 Background of the Study Elections form a critical process in democratic systems and application of information technologi...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | COMPUTER SCIENCE DEPARTMENT
-
8. DESIGN AND IMPLEMENTATION OF COMPUTERIZED STUDENTS IDENTITY CARD SYSTEM
» CHAPTER ONE INTRODUCTION 1.0 Introduction An identity document is any document which may be used to verify aspects of a person’s personality. If...Continue Reading »Item Type & Format: Project Material - Ms Word | 36 pages | Instant Download | Chapter 1-5 | COMPUTER SCIENCE DEPARTMENT
-
9. A Geographical Information Retrival System (GIRS)
» CHAPTER ONE INTRODUCTION 1.1 BACKGROUND OF STUDY According to Chang, K. T. (2008), Geographic Information Retrieval System (GIRS) is a system designed...Continue Reading »Item Type & Format: Project Material - Ms Word | 65 pages | Instant Download | Chapter 1-5 | COMPUTER SCIENCE DEPARTMENT
-
10. TOWARD PROVIDING HIGH SPEED INTERNET SERVICES TO STAFF AND STUDENTS OF KADUNA POLYTECHNIC TUDUNWADA CAMPUS
» TABLE OF CONTENTS Title page i Approval page ii Declaration iii Dedication iv Acknowledgement v Table of contents vi Abstract viii CHAPTER I: INTRODUC...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | COMPUTER SCIENCE DEPARTMENT