Design And Implementation Of A Result Processing And Transcript Generation System (A Case Study Of Federal Polytechnic Nekede)

Design And Implementation Of A Result Processing And Transcript Generation System (A Case Study Of Federal Polytechnic Nekede)

  • The Complete Research Material is averagely 42 pages long and it is in Ms Word Format, it has 1-5 Chapters.
  • Major Attributes are Abstract, All Chapters, Figures, Appendix, References.
  • Study Level: BTech, BSc, BEng, BA, HND, ND or NCE.
  • Full Access Fee: ₦6,000

Get the complete project » Delivery Within 34-48hrs
Abstract
Result processing can be a continuous process of converting data (scores, grade points credit units etc) into definite meaningful information (statement of result, transcript etc). These results are used to check the performance of each student in various courses. These results when processed manually, lead to many problem such insecurity of result, errors during computation, untidy results after changes must have effected, work load on the exam officer(s) etc.

However, computerizing the result processing and transcript generation will reduce these problems to their barest minimum. Providing password can do this, grant access to only authorized user(s). Corrections or changes are effected without making the work untidy. Also, stress on exam officer(s) is reduced.

The software used for this computerization was developed using the structured system analysis and design methodology (SSADM). Visual basic programming language 6.0 was used to generate the codes. After the results have been processed using the codes. After the results and transcripts are generated automatically when correct and complete data are entered.

Table of Content
Title page
Approval Page
Abstract
Table of Content

CHAPTER ONE
1.0 INTRODUCTION

1.1 Introduction
1.2 Background of the study
1.3 Statement of the problem
1.4 Objective of the study
1.5 Significance of the study
1.6 Scope of the study
1.7 Limitations of the study

CHAPTER TWO
2.0 LITERATURE REVIEW

2.1 Introduction
2.2 Benefits of Design
2.3 Result and Process

CHAPTER THREE
3.0 SYSTEM ANALYSIS AND DESIGN

3.1 Introduction
3.2 Problem Identification
3.3 Feasibility Study
3.4 System Analysis
3.5 System Design
3.6 Program Coding
3.7 Program Testing
3.8 System Implementation
3.9 The Organizational Structure
3.10 Demographic Variables
3.11 Data Flow Diagram of the Present System
3.12 Information Flow
3.13 Weakness Identified
3.14 High Level Model of the Proposed System

CHAPTER FOUR
4.0 INTRODUCTION

4.1 Introduction
4.2 Objectives of the New System
4.3 Main Menu
4.4 File
4.5 Update
4.6 Report
4.7 Help
4.8 Database Specification
4.9 Course Registration
4.10 Departmental Registration
4.11 Student Result
4.11.1 Student Information Form
4.12 Input Format
4.13 Output Format
4.14 Mathematical Specifications
4.15 Overall Data Flow Diagram
4.16 Data Dictionary
4.17 Choice of Programming Language
4.18 System Documentation and Implementation
4.19 System Requirement
4.20 Hardware Requirement
4.21 Software Requirements
4.22 How To Install the Software
4.23 Training of Operators and Application Details
4.24 Training of Operators
4.25 Application Details
4.26 Implementation Detail
4.27 Direct Changeover
4.28 Phase Segmented Changeover
4.29 Parallel Changeover
4.30 Changeover Recommended
4.31 Commissioning
4.32 Maintenance Details

CHAPTER FIVE
5.0 SUMMARY, CONCLUSION AND RECOMMENDATION

5.1 Summary
5.2 Conclusion
5.3 Recommendation
References
Appendix

Chapter One of Design And Implementation Of A Result Processing And Transcript Generation System Project Material starts from here.

CHAPTER ONE

1.1 INTRODUCTION
Over the years, several efforts have been made to alleviate the burden on teachers when it comes to result computation/processing. Data processing is defined as the entire process of converging or manipulating data into definite meaningful information. The information obtained at the end of the process is the result.

Therefore result processing can be seen as a continuous process of converting data (which can be scores, grade points, credit units etc) into definite meaningful information, which can either be statement of result or transcript. The end point of data processing activity by the administrative unit is the product of basic documents and information (statement of result and transcript) from basic data (which can be students’ scores, course credit unit, grade point etc) for managements’ use.

In educational institutions, the result produced information the management about the performance of each student in various courses. These results obtained are used to check the student’s level of understanding in the entire subject taught. In the course of this research, an intensive investigation was carried out on how physics and industrial physics department performs its result computation and transcript generation. From my findings, it appears that the current method adopted needs improvement. Introduction of computer in the system will do the much required magic in result computation. Structured system analysis and design methodology were applied to arrive to the development of the new system. Also, visual BASIC programming language 6.0 will be used to develop the required software

1.2 BACKGROUND OF THE STUDY
It is an established fact that after every assessment examination or research work, a result must be obtained. In any academic environment, there is need to have results to be aware of the students performance and to generate transcripts whenever the need arises.

To achieve this in higher institutions, it involves the registration of courses and students personal data examination scores, computation of result, transcript generation, records up dating and so on. However, the problem is how to carry out the theses activities presently, the result processing and transcript generation in computer science department is performed manually. Workers are employed to handle various stages of the process, such as registration of students, result computation and transcript generation. The introduction of computer in result processing and transcript generation will reduce the burden of manual processing to the barest minimum.

1.3 STATEMENT OF THE PROBLEM
The students result processing and transcript generation are done manually in physics and industrial physics long before now. The manual method of result processing and transcript generation from my investigation has many problems among which are:-

DELAY:- This occurs due to the tediousness of manual result processing and transcript generation. This gets so much at times that some students try to bribe their way out.

MISSING RESULTS:- This happens as a result or carrying about of files from one place to another. Some results may be lost in this process.

MISCALCULATIONS:- Human beings are prone to errors sometimes, during result computation, wrong formulae might be entered on the calculator, which give wrong answers but for computerized result, formulae are stored in the computer’s memory. This can be referred to whenever needed.

DUPLICATION OF RESULTS:- Due to the tiredness of the operator, a result can be duplicated since he/she has no strength to trace the student’s data such as registration number.

OMISSION I.E INCOMPLETE RESULTS: once these results have been documented on paper, one finds it difficult and tiresome to edit so as to cancel out some errors such as wrong entries omissions etc. when these corrections are effected, the resulting document are not often very neat and pleasant to the eyes. This also makes the transcript untidy since those corrections will also be affected on it.

1.4 OBJECTIVES OF THE STUDY
In this work, the primary objective is to computerize the result processing and transcript generation of computer science department federal polytechnic Nekede, Owerri. Also, only authorized user(s) gain access to the result. This is achieved by introducing password to protect and limit access to students result.

1.5 SIGNIFICANCE OF STUDY
Research carried out in computer science department shows that results are still being processes manually as well as transcript generation. This leads to various problems, which include;
• Insecurity of results
• Duplication of results
• Loss of results when files are being carried around.
• Wrong calculations during computation
• Omission of result.
• This project work will achieve the following:-
• Increase in efficiency
• Easy detection and correction of errors
• Reduce pressure of work on exam officers
• Makes computation less labor intensive. Hence, the need for computerization of result processing and transcript generation for physics department cannot be over emphasized.

1.6 SCOPE OF THE STUDY
This project work covers the registration of courses and the recording of student examination scores as well as processing the scores in order to general result and finally generate the transcript for the department of computer science, federal Polytechnic Nekede, Owerri.

1.7 LIMITATION OF STUDY
This project was faced with a number of restricting factors which made the work impossible to get beyond this scope. The most pressing factors were.
i. lack of finance
ii. epileptic power supply
iii. inadequate supply of data
iv. Inadequate time for the project work.

1.8 DEFINITION OF TERMS
SOFTWARE:- These are set of logically related instructions given to the computer to perform some specific tasks.
TRANSCRIPT:- it is a paper that outlines all the courses grades, grade point average, cumulative grade point average and final cumulative grade point average of a student.

STATEMENT OF RESULT:- This contains the FCGPA and the class of degree of a student. It is normally issued at the end of one’s academic program.
GRADE POINT (GP):- this is the corresponding points 0.00 to 5.00 of the grade letters F-A respectively.

GRADE POINT AVERAGE (GPA):- this is the point in which the academic performance of a student is measure at the end of every semester. It has the maximum value of 5.00 and minimum 0.00. It can be calculated thus: GPA- Sum of quality points/total credit unit for all course registered in the semester.

CUMULATIVE GRADE POINT AVERAGE (GPA)
This is the measure of the students overall academic performance at any given time in his academic program. It is normally calculated at the end of the session.
It is calculated thus:

CGPA = GPA first semester + GPA second semester/total credit unit for first semester + total credit unit for second semester.
FINAL CUMULATIVE GRADE POINT AVERAGE (FCGPA)
This is the measure of the students overall academic performance at the end of his /her academic program.

Chapter One of Design And Implementation Of A Result Processing And Transcript Generation System Project Material ends here.

Chapter two of this Design And Implementation Of A Result Processing And Transcript Generation System ” academic project material is available. Place Order if you want to download this work. The Chapter Two of “Design And Implementation Of A Result Processing And Transcript Generation System Contains: Literature Review, Introduction, Benefits Of Design And Result And Process.

Chapter three of this Design And Implementation Of A Result Processing And Transcript Generation System ” academic project material is available. Place Order if you want to download this work. The Chapter Three of “Design And Implementation Of A Result Processing And Transcript Generation System " Contains: System Analysis And Design, Introduction, Problem Identification, Feasibility Study, System Analysis, System Design, Program Coding, Program Testing, System Implementation, The Organizational Structure, Demographic Variables, Data Flow Diagram Of The Present System, Information Flow, Weakness Identified And High Level Model Of The Proposed System.

Chapter four of this Design And Implementation Of A Result Processing And Transcript Generation System academic project material is available. Place Order if you want to download this work. The Chapter Four of Design And Implementation Of A Result Processing And Transcript Generation System Contains: Introduction, Objectives Of The New System, Main Menu, File, Update, Report, Help, Database Specification, Course Registration, Departmental Registration, Student Result, Student Information Form, Input Format, Output Format, Mathematical Specifications, Overall Data Flow Diagram, Data Dictionary, Choice Of Programming Language, System Documentation And Implementation, System Requirement, Hardware Requirement, Software Requirements, How To Install The Software, Training Of Operators And Application Details, Training Of Operators, Application Details, Implementation Detail, Direct Changeover, Phase Segmented Changeover, Parallel Changeover, Changeover Recommended, Commissioning And Maintenance Details.

Chapter five of this Design And Implementation Of A Result Processing And Transcript Generation System academic project material is available. Place Order if you want to download this work. The Chapter Five of Design And Implementation Of A Result Processing And Transcript Generation System Contains: Summary, Conclusion, Recommendation, References And Appendix.

You either get what you want or your money back. T&C Apply







You can find more project topics easily, just search

Quick Project Topic Search