- The Complete Research Material is averagely 65 pages long and it is in Ms Word Format, it has 1-5 Chapters.
- Major Attributes are Abstract, All Chapters, Figures, Appendix, References.
- Study Level: BTech, BSc, BEng, BA, HND, ND or NCE.
- Full Access Fee: ₦6,000
Get the complete project »
ABSTRACT
As the strategic planner bogs is mind with trying to predict the future performance of some available variable qualitatively, at the mercy of human limitations and time constraint.
 The COMPUTERIZED FORECASTING TECHNIQUES comes not only to increase his speed of operation but to save him the trouble of determining which method to use and if so applied assures of reliability of such forecast.
 The features of this package include
1. Ability to choose from the various quantitative forecasting techniques.
2. Ability to select the method by menus.
3. finally a help path, which includes documentation on the software loading the Pascal computer.
TABLE OF CONTENT
TITLE PAGE
ABSTRACT
TABLE OF CONTENTS
CHAPTER ONE
INTRODUCTION.
1.1 Â Â Â Â OVERVIEW OF FORECASTING TECHNIQUES
1.2 Â Â Â Â STATEMENT OF PROBLEMS
1.3 Â Â Â Â PURPOSE OF THE STUDY
1.4 Â Â Â Â AIMS AND OBJECTIVES
1.5 Â Â Â Â SCOPE OF STUDY
1.6 Â Â Â Â LIMITATION
1.7 Â Â Â Â DEFINITION OF TERMS
CHAPTER TWO
REVIEW OF RELATED LITERATURE
2.0 Â Â Â Â FORECASTING TECHNIQUES
2.1 Â Â QUANTITATIVE TECHNIQUES
2.1.1 Â N-PERIOD MOVING AVERAGE
2.1.2 Â EXPONENTIAL SMOOTHING METHOD
2.1.3 Â LEAST SQUARE REGRESSION METHOD
2.2 Â Â Â Â QUANTITATIVE FORECASTING TECHNIQUES.
2.2.1 Â JURY OF EXECUTIVE OPINION
2.2.2 Â THE DELPHI TECHNIQUES
2.2.3 Â SALES FORCE COMPOSITE.
CHAPTER THREE
DESCRIPTION AND ANALYSIS OF THE EXISTING SYSTEM.
3.1 Â Â Â Â FACTS FINDING AND METHOD USED.
3.2 Â Â Â Â ORGANIZATIONAL STRUCTURE
3.3 Â Â Â Â OBJECTIVE OF THE EXISTING SYSTEM
3.4 Â Â Â Â INPUT, PROCESS, AND OUTPUT ANALYSIS
3.5 Â Â Â Â INPUT ANALYSIS
3.6 Â Â Â Â OUTPUT ANALYSIS
3.7 Â Â Â Â INFORMATION FLOW DIAGRAM.
3.8 Â Â Â Â PROBLEMS OF THE EXISTING SYSTEM.
3.9 Â Â Â Â JUSTIFICATION OF THE NEW SYSTEM.
CHAPTER FOUR.
DESIGN OF THE NEW SYSTEM.
4.1 Â Â Â Â OUTPUT SPECIFICATION AND DESIGN
4.2 Â Â Â Â INPUT SPECIFICATIONS AND DESIGN
4.3 Â Â Â Â FILE DESIGN
4.4 Â Â Â Â PROCEDURE CHART
4.5 Â Â Â Â SYSTEM FLOWCHART
4.6 Â Â Â Â SYSTEM REQUIREMENT.
4.6.1 Â HARDWARE REQUIREMENT.
4.6.2 Â SOFTWARE REQUIREMENT
CHAPTER FIVE
IMPLEMENTATION
5.1 Â Â Â Â PROGRAM DESIGN
5.2 Â Â Â Â PROGRAM FLOWCHART
5.3 Â Â Â Â PSEUDOCODES
5.4 Â Â Â Â SOURCE PROGRAM
5.5 Â Â Â Â TEST RUN
5.6 Â Â Â Â SYSTEM CHANGEOVER
CHAPTER SIX
DOCUMENTATION
6.1 Â Â Â Â SYSTEM DOCUMENTATION
6.2 Â Â Â Â PROGRAM DOCUMENTATION
6.3 Â Â Â Â USER DOCUMENTATION
CHAPTER SEVEN
SUMMARY, CONCLUSION AND RECOMMENDATION.
7.1 Â Â Â Â SUMMARY
7.2 Â Â Â Â CONCLUSION
7.3 Â Â Â Â RECOMMENDATION
BIBLIOGRAPHY
APPENDIX
CHAPTER ONE
INTRODUCTION
1.1Â OVERVIEW OF FORECASTING TECHNIQUES.
Right from the time life started, till now, man as sought to forecast the future. Things that happened before are used to justify what will take place in the future. Most of the times, it becomes true while at other time it facts. The ability to forecast the consequence of actions and events is one of the defining properties of the mind.
In any business situation, it is necessary to be able to make some predictions about the future in order to make some predictions about the future in order to plan the business operations well-Arriving at such an climate of the future is the purpose of the process of forecasting.
In the service sector, a forecast of demand for the service being offered is necessary to determine the number of staff that will be sufficient enough for the business and the quantity of raw materials to be bought.
In the retailing sectors, forecast of sales will be needed to decide staffing levels and also to determine what qualifies of stock should be purchased. Excessive levels of stock tie up working capital and storage space, further expenses can be incurred through such process as theft, insurance and possibly, deterioration. On the other head, inadequate re-order quantities such as high, ordering cost and the inability to meet customers demand.
 Forecasting is simply the scientific name for guessing, what the will bring. There are several standard techniques available for forecasting and each techniques has it’s own assumption, benefits and pitfall.
This project is concerned with the evaluation of the different forecasting techniques used by Anammco Ltd Emene, Enugu to determine how to manage their business operation.
Consider the following problems.
Problems 1: A sales manager collects together records of the past sales for particular product how does he find a forecasting techniques that gives good forecasts for this data?
Problems 2: A member of his staff suggests that a particular method of forecasting. How does the sales manager test this method of forecasting to see if it can yield any solution?
The ability to find answers to questions such as these is obliviously basic to the whole exercise of practical forecasting. It is necessary for me to know which forecasting techniques is best for any particular problems.
1.2 Â STATEMENT OF PROBLEMS.
The investigation done revealed that workers manually do the record keeping for forecasting.
The above manual system is outdated in terms of speed of processing and accuracy. This results into wastage of time and in efficiency in productions.
These inefficiencies call for the computerization of the operations of the forecast.
1.3Â PURPOSE OF THE STUDY
 The purpose of this research is to present the different forecasting techniques used by Anammco ltd in manufacturing their cars. It  is however to make analysis based in definite statistical data, which will enable an executive to take advantage of future condition to a greater extent than he could do without them.
1.4 Â AIMS AND OBJECTIVE OF THE STUDY
 The objective include the following.
A. To help the managers and all those interacted in obtaining forecast for practical purposes to be able to make decision on which forecasting techniques to use at different situation.
B. To demonstrate the different methods which Anammco uses in their business forecast.
C. To point out that all forecast used by Anammco have errors and that the measurement of the errors is critical.
D. To help the managers and forecasters to know the internal values of forecalls and the degree of confidence they need to have in the forecast.
1.5Â SCOPE OF STUDY.
This project uses the simple linear repression analysis that concerns itself with just one explanatory variable and a linear form of relationship. The explanatory variable could be time of periods.
 The other forecasting methods are the exponential smoothing and the moving average methods, which are used, should a time series observation exhibits a trend. This exhibition of trend can be verified with a scatter diagram of the observation against observed points.
Forecast can be made from such models built using methods  above after analysis by the software such forecast most likely will be in the short to medium term range.
The methods though appear complex is simplified as will be seen in the user friendly  user interfaces. The complex or the multi-variable regression analysis was avoided in this project as well as the logarithm exponential smoothing for the purpose of the project.
You either get what you want or your money back. T&C Apply
You can find more project topics easily, just search
-
SIMILAR COMPUTER SCIENCE FINAL YEAR PROJECT RESEARCH TOPICS
-
1. DESIGN AND IMPLEMENTATION OF A COMPUTERIZED LIBRARY MANAGEMENT SYSTEM (A CASE STUDY OF UNIVERSITY OF UYO GENERAL LIBRARY)
» ABSTRACTLibrary management system is a project which aims in developing a computerized system to maintain all the daily works of library. This project...Continue Reading »Item Type & Format: Project Material - Ms Word | 50 pages | Instant Download | Chapter 1-5 | COMPUTER SCIENCE DEPARTMENT
-
2. DESIGNING AND IMPLEMENTING A TRANSACTING SYSTEM OR AN ATM MACHINE. A CASE STUDY OF ECO BANK PLC, OBOSI ONICHA).
» CHAPTER ONE 1.0 INTRODUCTION The computerization of the banking/financial sector of the economy has really helped eliminate the manual operation of th...Continue Reading »Item Type & Format: Project Material - Ms Word | 45 pages | Instant Download | Chapter 1-5 | COMPUTER SCIENCE DEPARTMENT
-
3. DESIGN AND IMPLEMENTATION OF A COMPUTERIZED STUDENT REGISTRATION NUMBER SYSTEM
» ABSTRACTA number of problems associated with student registration number which include include improper course registration, late release of studentsâ...Continue Reading »Item Type & Format: Project Material - Ms Word | 50 pages | Instant Download | Chapter 1-5 | COMPUTER SCIENCE DEPARTMENT
-
4. Design and Implementation of An Online Recruitment System
» CHAPTER ONE 1.0 INTRODUCTION The computer system has been of a great assistance to Human Resource Management (HRM) in term of online recruitment simpl...Continue Reading »Item Type & Format: Project Material - Ms Word | 67 pages | Instant Download | Chapter 1-5 | COMPUTER SCIENCE DEPARTMENT
-
5. DESIGN AND IMPLEMENTATION OF SCHOOLS SOCIAL NETWORK
» CHAPTER ONE 1.1INTRODUCTION Social life in most of our University is diminishing because of some factor. These limitations of social life have affecte...Continue Reading »Item Type & Format: Project Material - Ms Word | 50 pages | Instant Download | Chapter 1-5 | COMPUTER SCIENCE DEPARTMENT
-
6. DESIGN AND IMPLEMENTATION OF A COMPUTERISED FACE DETECTION AND RECOGNITION SYSTEM
» ABSTRACT A society with accurate and updated database of her citizens will face less crime. Imagine a society where citizens know that their faces and...Continue Reading »Item Type & Format: Project Material - Ms Word | 65 pages | Instant Download | Chapter 1-5 | COMPUTER SCIENCE DEPARTMENT
-
7. DESIGN AND IMPLEMENTATION OF COMPUTER BASED LOTTERY PROCESSING SYSTEM USING VISUAL BASIC
» CHAPTER ONE: INTRODUCTION 1.1 BACKGROUND TO THE STUDYLottery system is a very wide field of study and can be classified in so many ways such as the U....Continue Reading »Item Type & Format: Project Material - Ms Word | 37 pages | Instant Download | Chapter 1-5 | COMPUTER SCIENCE DEPARTMENT
-
8. DESIGN AND IMPLEMENTATION OF A COMPUTER BASED MARKETING INFORMATION RECORD SYSTEM
» CHAPTER ONEINTRODUCTION1.0 IntroductionToday’s world of business is characterized by the wave of information technology. Seeking information about y...Continue Reading »Item Type & Format: Project Material - Ms Word | 65 pages | Instant Download | Chapter 1-5 | COMPUTER SCIENCE DEPARTMENT
-
9. DESIGN AND IMPLEMENTATION OF ONLINE FOOD ORDERING SYSTEM
» CHAPTER ONE INTRODUCTION 1.1 BACKGROUND OF STUDY The online food ordering system is one of the latest servicers most fast food restaurants in the west...Continue Reading »Item Type & Format: Project Material - Ms Word | 42 pages | Instant Download | Chapter 1-5 | COMPUTER SCIENCE DEPARTMENT
-
10. DESIGN AND IMPLEMENTATION OF A COMPUTERIZED MOTOR VEHICLE PLATE REGISTRATION SYSTEM
» ABSTRACT The Design and Implementation of motor vehicle plate system is an academic work which aims in developing a computerized system to maintain al...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | COMPUTER SCIENCE DEPARTMENT