- The Complete Research Material is averagely 52 pages long and it is in Ms Word Format, it has 1-5 Chapters.
- Major Attributes are Abstract, All Chapters, Figures, Appendix, References.
- Study Level: BTech, BSc, BEng, BA, HND, ND or NCE.
- Full Access Fee: ₦6,000
Get the complete project »
ABSTRACT
The candle molding machine is a vital device which cannot be done without, in any nation. This is because of the indispensable role candle plays, especially when there is no either source of light.
In order to enhance adequate supply to both urban and rural consumers, the production of a candle molding machine is important.
The major component of the candle molding machine are: the castled aluminum body, the adjustable screw, which serves as a separation between the too moulds cop and drag (male and female).
The reason why there is no cooling system is because the body is made of non – ferrous metal (aluminum) which does not create much vacuum for heat addition as much as steel do and also the mould has operate in opening system which admit natural air inside the mould when opened to cool the max and enhance the quick solidification of the wax. The mould due to its opening system, it works more efficiently under cool whether condition.
CHAPTER ONE
1.0 INTRODUCTION
In every developing nation like ours, it is supremely pertinent to acquaint ourselves with fabrication of machines and components. The clamour for indigenous technology should not be a lip service but should be pragmatic, so that our abundant local raw materials can be affectively utilized.
One area effort has been made is in the fabrication of candle moulding machine. Candle is one of the domestic items which all and sundry is cognizance of the indispensable role it plays in our various homes. We should not depend on the importation of such vital domestic item –candle.
However, there are already exiting machines for moulding of max into candle. Most of them are complicated in their design and their operation require the knowledge of skilled men and personnel to supervise the operation. Not only this, the cost of importing them here is not a taken, consequently, a candle moulding machine which does the same function of converting max into candle stick has been developed.
The candle mould is not costly, not complicated in design and does not require the knowledge of skilled men for its operation. It is manually operated and can be used in our college industries but owning to the limited number of mould cavities it is more advantageous in our home to produce candlestick when the need arises.
This project, aims at giving solutions to the problems encountered in the previous related project at most economic level. In our material selection we put into consideration of various materials that can be used to produce the fabrication and with which the machine can function satisfactorily at maximum level of safety.
1.1 BACKGROUND INFORMATION OF CANDLE MOULDING MACHINE
The candle moulding machine shares the same principle as the giant ones produced before it. Likes the gaint ones, it works on the principle of casting. Candle making can be described as the casting of wax into stick form. The molten wax is poured into the mould cavity and is allowed to solidify.
The machine has a moulding box (made of aluminum) having 15 cavities with each cavity making 15mm diameter and mm length approximately.
There is adjustable screw which move the mould in horizontal axis and also open and closes as each cast. Due to its opening system the solidification is enhanced quickely.
You either get what you want or your money back. T&C Apply
You can find more project topics easily, just search
-
SIMILAR BUSINESS MANAGEMENT FINAL YEAR PROJECT RESEARCH TOPICS
-
1. PERCEIVED ORGANIZATIONAL SUPPORT ON WORK BEHAVIOUR OF EMPLOYEES IN UNIVERSITY OF UYO
» ABSTRACT This study examined the influence of Perceived Organizational Support on work behaviors of employees in University of Uyo. To achieve this, s...Continue Reading »Item Type & Format: Project Material - Ms Word | 76 pages | Instant Download | Chapter 1-5 | BUSINESS MANAGEMENT DEPARTMENT
-
2. IMPACT OF BUDGET AND BUDGETARY CONTROL (A CASE STUDY OF MORRIS FERTILIZER COMPANY MINNA, NIGERIA STATE)
» INTRODUCTION 1.1 OVERVIEW OF THE STUDY Budgeting is essentially concerned with planning and its implementation of expected income and expenditure for ...Continue Reading »Item Type & Format: Project Material - Ms Word | 48 pages | Instant Download | Chapter 1-5 | BUSINESS MANAGEMENT DEPARTMENT
-
3. EFFECT OF POLLUTION TO THE SOCIETY IT’S CAUSES AND EFFECTS (A CASE STUDY OF ENUGU METROPOLIS)
» CHAPTER ONE INTRODUCTION The production of pollutions comes as the by product of man’s actions. They are residences of things he makes uses and ...Continue Reading »Item Type & Format: Project Material - Ms Word | 46 pages | Instant Download | Chapter 1-5 | BUSINESS MANAGEMENT DEPARTMENT
-
4. THE INFLUENCE OF COOPERATIVE SOCIETIES TOWARDS RURAL DEVELOPMENT (A CASE STUDY OF NSIT UBIUM LOCAL GOVERNMENT AREA OF AKWA IBOM STATE)
» ABSTRACT The cooperative has played a key role in rural development and always recognized as an integral part of our local economy. Cooperative has id...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | BUSINESS MANAGEMENT DEPARTMENT
-
5. EFFECTS OF MOTIVATION ON EMPLOYEE PERFORMANCE A CASE STUDY OF FIRST BANK PLC
» ABSTRACT The introduction of universal banking law has brought changes over the years, with it stiff competition in the banking industry. Commercial b...Continue Reading »Item Type & Format: Project Material - Ms Word | 103 pages | Instant Download | Chapter 1-5 | BUSINESS MANAGEMENT DEPARTMENT
-
6. OFFICE EQUIPMENT AND THEIR CONTRIBUTIONS TO THE SUCCESS OF A BUSINESS ORGANIZATION (A CASE STUDY IN NNPC, ENUGU)
» CHAPTER ONE INTRODUCTION BACKGROUND Office machines and equipments being used in business office today have accounted tremendously to the present and ...Continue Reading »Item Type & Format: Project Material - Ms Word | 67 pages | Instant Download | Chapter 1-5 | BUSINESS MANAGEMENT DEPARTMENT
-
7. INVENTORY MANAGEMENT IN A MANUFACTURING FIRM (CASE STUDY OF SEVEN - UP BOTTLING COMPANY PLC ABA)
» CHAPTER ONE 1.1 INTRPDUCTION Inventory in some big organization constitute the largest item of working capital and it’s control is very essentia...Continue Reading »Item Type & Format: Project Material - Ms Word | 70 pages | Instant Download | Chapter 1-5 | BUSINESS MANAGEMENT DEPARTMENT
-
8. SUCCESSION PLANNING IN SMALL AND MEDIUM SCALE ENTERPRISES’ (SMEs) SUSTAINABILITY IN UYO MUNICIPALITY, AKWA IBOM STATE
» ABSTRACT This study, Succession Planning and SMEs Sustainability in Uyo Municipality of Akwa Ibom State, was designed to underscore the relationship b...Continue Reading »Item Type & Format: Project Material - Ms Word | 80 pages | Instant Download | Chapter 1-5 | BUSINESS MANAGEMENT DEPARTMENT
-
9. A COMPARATIVE ANALYSIS OF RENTAL VARIATION IN RESIDENTIAL AND COMMERCIAL PROPERTIES IN NIGERIA (A CASE STUDY OF PORT HARCOURT 2004- 2014)
» ABSTRACT This research has investigated in to a comparative analysis of rental variation in residential and commercial properties in Port Harcourt 200...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | BUSINESS MANAGEMENT DEPARTMENT
-
10. MANAGEMENT OF WORKING CAPITAL IN SMALL AND MEDIUM SCALE ENTERPRISE
» TABLE OF CONTENTS Pages Title page i Declaration ii Certification iii Dedication iv Acknowledgements v Table of Contents vi List of Tables x Abstract ...Continue Reading »Item Type & Format: Project Material - Ms Word | 72 pages | Instant Download | Chapter 1-5 | BUSINESS MANAGEMENT DEPARTMENT