- The Complete Research Material is averagely 52 pages long and it is in Ms Word Format, it has 1-5 Chapters.
- Major Attributes are Abstract, All Chapters, Figures, Appendix, References.
- Study Level: BTech, BSc, BEng, BA, HND, ND or NCE.
- Full Access Fee: ₦6,000
Get the complete project »
This project is designed to make the students utilize as many theoretical and practical concept as have been instructed in alstron to mechanical engineering workshop technology. Students are expected to learn and apply concepts, principles about energy specially the conversions of electrical energy to thermal energy, conduction and conventional heat transfer etc.
Also the determination of the properties of various ferrous and non-ferrous materials, electrical installation occults. The application of engineering measurement and quality control.
Also to build an intellectual ability in interpretation of working drawing in designing and development before and after working process. Students will get an opportunity to appreciate safety, and the use of both machine and hand tools in the course of working.
TABLE OF CONTENT CHAPTER ONE BACK GROUND1.1.0 Objective of project
1.2.0 Importance
1.3.0 Limitations
CHAPTER TWO LITERATURE REVIEW2.1.0 History of ovens
2.2.0 Types of oven
2.2.1 Conventional/standard oven
2.2.2 Fan forced oven
2.2.3 Microwave oven
2.2.4 Multi-functional oven
2.2.5 Solar oven
2.3.0 Mode of oven operation
2.3.1 Electrical section
2.3.2 Gas section
CHAPTER THREE3.1.0 SAMPLE ACTIVITIES
3.1.1 Sequence of activities during operation
3.2.0 Summary of events
3.3.0 Graphic illustration
F.G.1.1 Obilique projection
F.G.1.2 Ontograhic projection
F.G.1.3 Sectional view
F.G.1.4 Circuit Diagram
CHAPTER FOUR4.1.0 MATERIAL METROLOGY
4.1.1 Materials and Reasons for use
4.1.2 Behaviour of mild steel when heated
4.1.3 Graphic of heating and cooling curves for mild steel
4.2.0 Working tools use for project
4.1.0 Bill of Quantities
CHAPTER FIVE5.1.0 Performance and evaluation of oven
5.2.0 Care and maintenance
5.3.0 Standards and symbols
5.4.0 Reading
5.5.0 Combustion of methane gas
5.6.0 Conclusion and recommendation
Bibliography
CHAPTER ONE BACKGROUND1.1.0 OBJECTIVES
This project is undertaken to
(1) Compare the various ways used in the production of an electric and gas oven.
(2) Disclose the different types of process in the manufacturing of an electric oven and also a gas oven in the past in comparison to the morden days method.
(3) Exploit the local facilities available in the construction of the oven as against imported ovens.
(4) To exhibit the usefulness of a dual-purpose oven in the economy and technology growth of the nation.
(5) To know the convenience in the use of alternate power source for operation of ovens.
(6) Discover the basic principle involved in the design and maintenance of a dual purpose oven.
1.2.0 IMPORTANCE OF OVENS
In actual analytical enunciation an oven is an enclosed chamber in which things are heated or cooked with various sources of power.
Its importance borders around its function, which are as follows;
(i) It is used to meet the everyday basic need of cooking, (baking, toasting, gritting, toasting) of food materials for human consumption.
(ii) Ovens are used for heat treatment of substance in laboratories and industries.
(iii) Also as a means of preservation by heat application to perishable materials (organic and inorganic) in general.
(iv) Sterilization of instruments and equipment for industrial use is done by heat application using oven.
(v) Expelling of moisture content to a required measure in some substance is also done using oven.
(vi) Early manufactured ovens where used as a source of room heaters during cold weathers in cold climates.
Other importance boarding around its energy source is that the use an alternative source of energy when either fossil fuel or electricity is not available. This can be relatively save cost when necessitated.
You either get what you want or your money back. T&C Apply
You can find more project topics easily, just search
-
SIMILAR MECHANICAL ENGINEERING FINAL YEAR PROJECT RESEARCH TOPICS
-
1. DESIGN AND FABRICATION OF A PALM FRUIT DIGESTER
» TABLE OF CONTENT CHAPTER ONE1.1 Introduction 1.2 Manual Digester 1.3 Motorized Digester 1.4 Types of Motorized Digester CHAPTER TWO2.1 Literature Revi...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
2. DESIGN AND FABRICATION OF BASIC STATIC AND DYNAMIC BALANCING MACHINE
» ABSTRACTThis work is an attempt to evolve a means for statically and dynamical balancing of mechanical components. This will no doubt evolve greater s...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
3. THE DESIGN AND CONSTRUCTION OF A SPIN DRYER
» ABSTRACTThis work is aimed at designing and fabricating a spin dryer which can be used in drying spent grains after brewing. This will no doubt save c...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
4. DESIGN AND CONSTRUCTION OF OCEAN SURFACE AND SUBSURFACE CURRENT SIMULATOR
» CHAPTER 1 1.1 Introduction A ocean simulator is a physical basin or tank used to carry out hydrodynamic tests with ship models, for the purpose of des...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
5. STABILITY STUDIES OF SEMI –SUBMERSIBLE BODY IN LAMINAR AND TURBULENT FLOW ENVIRONMENT
» TABLE OF CONTENT Title Page CHAPTER ONE: INTRODUCTION 1.1 Background of Study 1 1.2 Statement of Problem 3 1.3 Objectives of Study 4 1.4 Scope and Lim...Continue Reading »Item Type & Format: Project Material - Ms Word | 71 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
6. DISTRIBUTIONAL PATTERN OF AUTOMOBILE MECHANIC WORKSHOP IN IBADAN NORTH LOCAL GOVERNMENT, OYO STATE
» CHAPTER ONE INTRODUCTION Automobile Industry can be refers to as the collection of firms that produce, manufacture broadly automobiles using the same ...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
7. CONSTRUCT AN EFFECTIVE AND DURABLE BOOKSHELF SUITABLE FOR AN OFFICE
» ABSTRACT This study sought to establish youth Participation in Agricultural Activities in Jema’a Local Government of Kaduna State, Nigeria. The ...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
8. INVESTIGATION OF THE EFFECT OF MOULDING SAND (NATURAL & SYNTHETIC) ON CASTING OF FLANGE USING ALUMINIUM
» ABSTRACTThis study tend to investigate the effect of synthetic and natural moulding sand on casting of flange like component. In this study FUTA logo ...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
9. CEMENT MANUFACTURING /PRODUCTION IN NIGERIA. A CASE STUDY OF EDO CEMENT FACTORY, UKPILLA, EDO STATE.
» ABSTRACT The project studied the manufacture of cement production in Nigeria using Ukpilla as a case study. It enables us to compare the differences b...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
10. APPRAISAL OF THE UTILIZATION OF INSTRUCTIONAL MATERIALS IN TEACHING AUTOMOBILE TECHNOLOGY IN TECHNICAL COLLEGES, KANO (A CASE STUDY OF SOME SELECTED S...
» TABLE OF CONTENTS Title page i Approval page ii Declaration iii Dedication iv Acknowledgment v Table of contents vi Abstract ix CHAPTER ONE: INTRODUCT...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT