- The Complete Research Material is averagely 52 pages long and it is in Ms Word Format, it has 1-5 Chapters.
- Major Attributes are Abstract, All Chapters, Figures, Appendix, References.
- Study Level: BTech, BSc, BEng, BA, HND, ND or NCE.
- Full Access Fee: ₦6,000
Get the complete project »
ABSTRACT
The fabrication of a pressurized kerosene oven.
This project has been fabricated with special economical needs for the small scale baking industries, wholesalers and distributors who import this type of baking oven from outside the country to supply the customers.
Who wish to use it or those that cannot after gas oven can be used in baking any type of available within the tropics.
It I am also be used in are where there are no source of electricity or gas.
CHAPTER ONE
INTRODUCTION
The fabrication of this project kerosene oven is a borrowed idea, which was modified to improve the system.
It is a manually operated type of oven which has the capability of supplying heat energy at high and low temperatures. This type of oven operates with a single point burner.
The introduction of this type of pressurized oven in the 18th century has undergone series of modification till date.
The production of this baking appliance is cost effective. This has improved the local industries/factories and has reduced the importation of foreign types of baking appliance.
The local kerosene pressurized oven is operational effective. Thus it attains a very high temperature for the convenience of baking
You either get what you want or your money back. T&C Apply
You can find more project topics easily, just search
-
SIMILAR MECHANICAL ENGINEERING FINAL YEAR PROJECT RESEARCH TOPICS
-
1. DESIGN AND CONSTRUCTION OF PUNCH AND DIE FOR PRODUCTION OF CUPS LETTER OF TRANSMITTAL
» CHAPTER ONE 1.0 INTRODUCTION In recent years, Nigeria lays strong emphasis on the manufacturing of both industrial and household products within the c...Continue Reading »Item Type & Format: Project Material - Ms Word | 35 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
2. CEMENT MANUFACTURING /PRODUCTION IN NIGERIA. A CASE STUDY OF EDO CEMENT FACTORY, UKPILLA, EDO STATE.
» ABSTRACT The project studied the manufacture of cement production in Nigeria using Ukpilla as a case study. It enables us to compare the differences b...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
3. DESIGN AND FABRICATION OF A DUST EXTRACTOR
» ABSTRACTMan’s imp act on global environment system especially in the area of dust extraction is now at a scale where it is disrupting. These dust ex...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
4. THE CONSTRUCTION OF A MOBILE REFRIGERATOR FRIDGE
» ABSTRACTThis write up focuses attention on a detailed report and account on the process of construction and formulation of plan for the actual and phy...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
5. DESIGN AND SIMULATE A MECHANICAL AGITATOR THAT CAN BE USED TO SUPPLEMENT PAINT MIXING WITH STANDARD PLANT FACILITIES
» CHAPTER 1 1.0 INTRODUCTION 1.1 Background to the Work Mixing is the process of thoroughly combining different materials to produce a homogenous produc...Continue Reading »Item Type & Format: Project Material - Ms Word | 105 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
6. EVALUATION OF THE MECHANICAL PROPERTIES OF POLYPROPYLENE/CALCIUM CARBONATE NANOCOMPOSITE AT VARIOUS CREEP CONDITIONS
» ABSTRACT The mechanical properties of Polypropylene and Polypropylene/Calcium Carbonate nanocomposites were evaluated. Data on the influence of Calciu...Continue Reading »Item Type & Format: Project Material - Ms Word | 89 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
7. MULTIDISCIPLINARY DESIGN OPTIMIZATION OF AN AIRCRAFT WING (AERODYNAMICS & STRUCTURAL)
» ABSTRACT The quest to operate at the cutting edge of technology is a worthwhile effort but requires intensive research and brilliant implementation of...Continue Reading »Item Type & Format: Project Material - Ms Word | 98 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
8. TRANSFORMER REWINDING MACHINE WITH DIGITAL COUNTER
» INTRODUCTION 1.1 Background of the Project Typically, a winding machine winds a material such as metal wire, thread, or paper, onto a core, spool, or ...Continue Reading »Item Type & Format: Project Material - Ms Word | 79 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
9. FABRICATION OF A FOLDABLE CAMP BED
» CHAPTER ONE 1.0 INTRODUCTION Camp bed is used universally for relaxation, emergency eases such as war and in other several ways, and it is the acknowl...Continue Reading »Item Type & Format: Project Material - Ms Word | 41 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
10. MODIFICATION OF A MOTORIZED MAIZE SHELLER
» TABLE OF CONTENTS Title page i Declaration ii Approval iii Dedication iv Acknowledgements v Table of Contents vi Abstract vii CHAPTER ONE 1.0 Backgrou...Continue Reading »Item Type & Format: Project Material - Ms Word | 33 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT