- The Complete Research Material is averagely 71 pages long and it is in Ms Word Format, it has 1-5 Chapters.
- Major Attributes are Abstract, All Chapters, Figures, Appendix, References.
- Study Level: BTech, BSc, BEng, BA, HND, ND or NCE.
- Full Access Fee: ₦6,000
Get the complete project »
TABLE OF CONTENT
Title Page
CHAPTER ONE: INTRODUCTION
1.1 Background of Study - - - - - - - - 1
1.2 Statement of Problem - - - - - - - - 3
1.3 Objectives of Study - - - - - - - - 4
1.4 Scope and Limitation of Study - - - - - - - 4
1.5 Significance of Study - - - - - - - - 5
CHAPTER TWO: LITERATURE REVIEW
2.1 Semi-Submersible Bodies - - - - - - - - 6
2.2 Advantages of Semi-submersibles - - - - - - 6
2.3 Disadvantages of Semi-submersibles - - - - - - 7
2.4 Types of Semi-Submersibles - - - - - - - 7
2.4.1 Tourist semi-submersible - - - - - - - 7
2.4.2 Military semi-submersible - - - - - - - 8
2.4.3 Deep-sea ocean research semi-submersible - - - - - 9
2.4.4 Offshore drilling semi-submersible - - - - - - 10
2.4.5 Crane semi-submersible - - - - - - - - 11
2.4.6 Floating dry dock semi-submersible - - - - - - 12
2.5 Classification of the Offshore Platforms - - - - - - 13
2.6 Critical Design and Production Issues for Semi-Submersibles - - - 14
2.7 Stability of Semi-Submersible Bodies - - - - - - 19
2.7.1 Methods of Stability Study of Semi-submersible - - - - 20
2.7.2 Conventional Stability Studies - - - - - - - 20
2.7.3 Wave Basin Test - - - - - - - - 20
2.7.4 Wind Tunnel - - - - - - - - - 23
2.7.5 Simulation Methods - - - - - - - - 23
2.7.6 Application of CFD Offshore - - - - - - - 24
2.8 CFD Studies for Semi-Submersibles - - - - - - 26
2.9 Computational Fluid Dynamics - - - - - - - 29
2.9.1 Navier-Stokes equations - - - - - - - 30
2.9.2 Discretization of modeled equations - - - - - - 33
2.9.3 Turbulence and Its Modeling - - - - - - - 35
CHAPTER THREE: DESIGN PROCESS AND METHODS
3.1 Design Considerations - - - - - - - - 40
3.2 Design Concepts - - - - - - - - - 40
3.3 Model Design and Working Principle - - - - - - 41
3.3.1 Platform and Frame System - - - - - - - 44
3.3.2 Structural Support System - - - - - - - 45
3.3.3 Observation Bay System - - - - - - - 45
3.3.4 Water Supply System - - - - - - - - 45
3.4 Component Design - - - - - - - - 46
3.4.1 Platform Slab - - - - - - - - - 47
3.4.2 Frame - - - - - - - - - - 47
3.4.3 Tripod Structural Support - - - - - - - 48
3.4.4 Pontoons - - - - - - - - - - 48
3.4.5 Perspex Basin - - - - - - - - - 48
3.4.6 Centrifugal Pump - - - - - - - - 50
3.5 Fabrication Process - - - - - - - - 50
3.6 Materials Selection - - - - - - - - 52
CHAPTER FOUR: RESULTS AND DISCUSSION
4.1 Basic Equations - - - - - - - - - 54
4.2 Experiment - - - - - - - - - 56
4.3 Observations - - - - - - - - - 57
4.4 Results - - - - - - - - - - 57
4.5 Summary - - - - - - - - - - 58
CHAPTER FIVE: CONCLUSION AND RECOMMENDATIONS
5.1 Conclusion - - - - - - - - - 59
5.2 Recommendation - - - - - - - - - 59
References - - - - - - - - - - 61
You either get what you want or your money back. T&C Apply
You can find more project topics easily, just search
-
SIMILAR MECHANICAL ENGINEERING FINAL YEAR PROJECT RESEARCH TOPICS
-
1. DESIGN AND FABRICATION OF WOOD LATHE MACHINE
» CHAPTER ONE 1.0 INTRODUCTION The wood lathe machine is introduced to lessen the human suffering and to improve economical and technological standard, ...Continue Reading »Item Type & Format: Project Material - Ms Word | 49 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
2. DESIGN AND FABRICATION OF MECHANCIAL LAWN MOWER
» ABSTRACTMechanical engineering department of the named institute has many non operational machines sequel to this fact maintenance which resulted to n...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
3. APPRAISAL OF THE UTILIZATION OF INSTRUCTIONAL MATERIALS IN TEACHING AUTOELECTRICTY TECHNOLOGY IN TECHNICAL COLLEGES IN NIGER STATE
» TABLE OF CONTENTS Title page i Approval page ii Declaration iii Dedication iv Acknowledgement v Table of contents vi Abstract viii CHAPTER ONE: INTROD...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
4. MODELING AND EVALUATION OF A PASSIVE FLAT-PLATE SOLAR COLLECTOR
» ABSTRACT Background: Maternal mortality is an enormous public health burden in developing countries of the world. Birth preparedness and emergency rea...Continue Reading »Item Type & Format: Project Material - Ms Word | 157 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
5. DESIGN AND FABRICATION OF A PAN GRANULATING MACHINE
» CHAPTER ONE INTRODUCTION 1.1 BACKGROUND OF THE STUDY Fertilizer in a broad sense include all materials that are added to the soil to supply certain el...Continue Reading »Item Type & Format: Project Material - Ms Word | 48 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
6. REGRESSION MODEL THAT COULD BE USED TO PREDICT THE REPAIR TIME IN HOURS OF A PEUGEOT CAR
» CHAPTER ONE Introduction 1.0 Introduction Time standards are realistic goals that must be accomplished by operators and technicians. They could be use...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
7. STRATEGIES FOR IMPROVING STUDENTS’ PERFORMANCE IN WELDING AND FABRICATION TECHNOLOGY IN TECHNICAL COLLEGES OF KADUNA STATE
» TABLE OF CONTENTS Title page i Approval page ii Declaration iii Dedication iv Acknowledgement v Table of contents vi Abstract viii CHAPTER ONE: INTROD...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
8. DESIGN AND CONSTRUCTION OF A SOLAR WATER HEATER FOR DOMESTIC USE
» CHAPTER ONE 1.1INTRODUCTION Flat plate collectors for solar water heat were population in Florida and southern California in the 1920s. Photo type Isr...Continue Reading »Item Type & Format: Project Material - Ms Word | 41 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
9. IMPLEMENTING TOTAL PRODUCTION MAINTENANCE IN NIGERIA MANUFACTURING COMPANY (DELTA STEEL COMPANY AS A CASE STUDY)
» ABSTRACT Companies around the world spend a lot of money on buying new equipment to increase production but a little is done to get hundred percent ou...Continue Reading »Item Type & Format: Project Material - Ms Word | 93 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT
-
10. THE IMPACT OF JET APPARATUS
» ABSTRACTThis project is focused on experimental analysis of impact of water jet on vanes. This work intends to predict the output of a pelton wheel, a...Continue Reading »Item Type & Format: Project Material - Ms Word | 52 pages | Instant Download | Chapter 1-5 | MECHANICAL ENGINEERING DEPARTMENT